Most Bluetooth speakers have a built-in rechargeable battery that can be charged using a charging cable and a power source such as a USB wall adapter, computer, or power bank. To charge the speaker, you’ll only need to connect the charging cable to the charging port on the speaker and then plug the other end of the cable into a power source.
However, it is not uncommon for a Bluetooth speaker to fail to charge, especially if it is not properly cared for and maintained. This can be an inconvenience, especially if you rely on the speaker for your music and other audio needs.
If your charging port is faulty or damaged, the speaker may fail to charge properly. Other factors that can affect the charging capability of a Bluetooth speaker include a faulty charging cable, a dirty charging port, defective batteries, and power source issues.
How to Bypass Charging Port on Bluetooth Speaker
One of the frequently asked is “Can I bypass the charging port on a Bluetooth speaker?” Technically it is possible to bypass the charging port on a Bluetooth speaker, but it is not recommended to do so. Generally, bypassing the charging port can potentially damage the speaker, or even cause fire.
Equally important, using an alternative charging method may not provide the correct voltage or current required for the battery. This can lead to reduced battery life or even permanent damage to your speaker or battery.
In addition, bypassing the charging port is likely to void the warranty on your Bluetooth speaker, and any damage caused by this type of modification will not be covered by the manufacturer. Having said that, let’s learn several methods on how to charge a Bluetooth speaker without a charging port;
Using USB cable
If the charging port on your speaker is damaged, but the USB port is working correctly, you can use a USB cable to charge the device. All you need to do is to connect the USB cable to a power source, such as a computer, power bank, or USB wall adapter, and connect the other end to the USB port on the speaker. That said, here are simple steps on how to charge Bluetooth speaker with USB port;
- Locate the USB port on your Bluetooth speaker. This is usually located on the back or the side of the speaker.
- Connect one end of the USB cable to the USB port on the speaker.
- Plug the other end of the USB cable into a USB power source. This can be a wall adapter, a computer, or a USB power bank.
- Turn on the power source and wait for the speaker to start charging. Some speakers have a charging indicator light that will turn on when it’s charging.
- Once the speaker is fully charged, unplug the USB cable from both the speaker and the power source.
Using an external charger to charge the battery
If your Bluetooth speaker comes with a built-in battery, then this method may not work for you. However, if your device has a removable battery, you can remove it and charge it externally. Here are simple steps you can follow to charge the battery externally;
- Turn off the speaker before removing the battery. This will prevent any damage to the device and ensure that the battery is not damaged during the removal process.
- Locate the battery compartment on the device. This is usually on the back of the device and may be secured with screws or clips.
- Use a screwdriver or a flat tool to remove the screws or clips securing the battery compartment.
- Carefully remove the battery from the compartment. Be sure to hold the battery by the edges to avoid touching the electrical contacts.
- Place the battery in a compatible external charger. Make sure the charger is designed for the type and size of battery you have.
- Follow the instructions for your specific charger to properly charge the battery. This usually involves connecting the charger to a power source and inserting the battery into the charger.
- Leave the battery to charge until it is fully charged. The charger will often indicate when the charging is complete.
- Once the battery is fully charged, remove it from the external charger and reinsert it into the device. Make sure the battery is properly aligned and securely in place.
- Replace the battery compartment cover and secure it with the screws or clips that were removed earlier.
- Turn on the Bluetooth device and verify that the battery is working properly.
Connecting the charger to the charging logic
The charging logic is designed to regulate the charging process and prevent overcharging, which can damage the battery and the speaker. However, if your charging port is not working, you can use the charging logic to charge your speaker.
Charging a Bluetooth speaker by connecting the charger directly to the charging logic can be a little more complicated, as it requires some knowledge of electronics and circuitry. If you’re not familiar with these concepts, it’s best to consult a professional to do it for you. That said, here are some simple steps for charging a Bluetooth speaker using the charging logic;
- Open up the Bluetooth speaker to access the charging logic. This may involve removing screws or prying apart the casing.
- Locate the charging logic. This will be a small circuit board with a micro-USB or USB-C port and other components.
- Identify the positive (+) and negative (-) terminals on the charging logic. These will be labeled on the circuit board or indicated by symbols.
- Connect the positive (+) and negative (-) terminals to the corresponding terminals on your charger. Make sure the voltage and amperage of the charger match the specifications of the device.
- Turn on the charger and monitor the charging process. You may need to use a multimeter to measure the voltage and current being supplied to the device.
- Once the battery is fully charged, disconnect the charger from the charging logic and reassemble the speaker.
Note that charging a Bluetooth speaker using the above methods can be risky if not done correctly. If you’re not comfortable with electronics or don’t have the necessary tools and equipment, it’s best to consult with a professional technician or contact the manufacturer for assistance.
In most cases, the charging port is easy to repair, plus you can even get a replacement. The best part yet, if the speaker is still under warranty, the manufacturer may offer a repair or replacement service for the damaged charging port.
How to Fix Charging Port on Speaker
Repairing a charging port on a Bluetooth speaker can be a bit challenging, but it is doable. In some cases, the charging port is often easy to access, making the repair relatively straightforward. Ideally, the types of repairs needed largely depend on the design of the speaker and the extent of the damage.
If you have experience with electronics repair and have the necessary tools, you may be able to repair the charging port yourself. If you are experiencing issues with the charging port on your speaker, you can try the following steps to fix it;
- Clean the charging port- Over time, dust, dirt, and debris can accumulate in the charging port, preventing the charging cable from making proper contact. To clean the charging port, you can use a small, soft-bristled brush to clean it gently. Be careful not to damage the pins inside the port.
- Check the charging cable- In some instances, the charging problem might not be with the speaker but with the charging cable. You can try using a different cable and see if that works.
- Check the power source- Make sure the power source you’re using to charge the speaker is working correctly. If the power source isn’t delivering enough power, the speaker might not charge correctly.
- Restart the speaker- Sometimes restarting the speaker can solve the issue. Turn off the speaker and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
- Replace the charging port- If none of the above steps work, you may need to replace the charging port. You can take your speaker to a repair shop, or you can try replacing it yourself.
How to Replace Bluetooth Speaker Charging Port
- Open the speaker- Using the screwdriver, carefully remove any screws holding the speaker’s cover in place. Once you have removed the screws, gently remove the cover to reveal the internal components of the speaker.
- Locate the charging port- The charging port is usually located near the speaker’s power supply board. The port often comprises small metal pieces with several pins or connectors.
- Remove the old charging port- Using the pliers, carefully remove the old charging port from the circuit board by melting the solder and pulling the port off.
- Install the new charging port- Take the new charging port and insert it into the hole where the old charging port was located. Then, solder the new charging port in place.
- Test the speaker- After the new charging port is installed, reassemble the speaker and test it to ensure that it’s charging properly.
The Parting Shot!
If your Bluetooth charging port is not working, there may still be ways to charge your speaker, but it depends on the specific model of the speaker and its design. Some Bluetooth speakers may offer alternative charging methods, such as using a USB port or a removable battery that can be charged externally.
However, it’s essential to note that bypassing or modifying the charging port yourself can be challenging and may void the warranty. If your Bluetooth speaker’s charging port is damaged or broken, it is always a good idea to repair or replace it in order to charge the speaker properly.
